Beeb black plastic surround

for bbc micro/electron hardware, peripherals & programming issues (NOT emulators!)
Post Reply
MM5XT
Posts: 4
Joined: Mon Jan 07, 2019 12:49 pm
Contact:

Beeb black plastic surround

Post by MM5XT » Fri Jan 11, 2019 4:54 pm

Good day all.

Before contacting a small manufacturer I know and physically pulling item of the Beeb, I though I'd first ask to see of anyone is producing the black plastic keyboard surround?
Anyone know of a current source of these?

Regards

Michael
Last edited by MM5XT on Mon Jan 14, 2019 4:16 pm, edited 1 time in total.

User avatar
DutchAcorn
Posts: 1973
Joined: Fri Mar 21, 2014 9:56 am
Location: Maarn, Netherlands
Contact:

Re: Beeb black plastic suround

Post by DutchAcorn » Fri Jan 11, 2019 5:05 pm

There has been a recent similar request: viewtopic.php?f=3&t=16304, but without any responses.

When fixing the ashtray I found that the surround is actually a very dark brown, not black. You can see if you put a floppy disk next to it in daylight.
Paul

Image

MM5XT
Posts: 4
Joined: Mon Jan 07, 2019 12:49 pm
Contact:

Re: Beeb black plastic suround

Post by MM5XT » Fri Jan 11, 2019 8:05 pm

Spoke with a outfit that make panels out of Polycarbonate. They would need a run of 25 to make it worth while, I'd only be wanting 3 perhaps 4 myself.

Michael

RobC
Posts: 2410
Joined: Sat Sep 01, 2007 9:41 pm
Contact:

Re: Beeb black plastic suround

Post by RobC » Fri Jan 11, 2019 10:01 pm

What sort of price would we be looking at? I'd be interested in 3 or 4 (possibly 5 or 6) if they looked the part. I suspect others on here would be interested too.

[Thinking about it, someone mentioned getting this done before - I remember something about them not being able to do the printing below the leds.]

brown1d
Posts: 7
Joined: Tue Nov 27, 2018 1:05 pm
Contact:

Re: Beeb black plastic suround

Post by brown1d » Fri Jan 11, 2019 10:23 pm

I originated the question from earlier in the week.

I would also be interested in a couple; although I must admit I would like the printing for the text on the LEDs as well.

MM5XT
Posts: 4
Joined: Mon Jan 07, 2019 12:49 pm
Contact:

Re: Beeb black plastic suround

Post by MM5XT » Fri Jan 11, 2019 11:39 pm

Sorry that I missed the original post by brown1d, anyhow, I've used this company before, they supply replica panels for some Heathkit equipment.
I'd guess the cost would be 20-30 USD given the small quantity, not sure how much the cutting adds to the cost, but will find out.

Michael

rharper
Posts: 367
Joined: Sat Sep 01, 2012 5:19 pm
Location: Dunstable
Contact:

Re: Beeb black plastic suround

Post by rharper » Sat Jan 12, 2019 3:23 pm

I would be interested in 2 or 3.
Ray
Raycomp

User avatar
Lardo Boffin
Posts: 1358
Joined: Thu Aug 06, 2015 6:47 am
Contact:

Re: Beeb black plastic suround

Post by Lardo Boffin » Sat Jan 12, 2019 3:42 pm

I need two! But depending on price would probably take at least one more for spare.

Lardo
BBC model B 32k issue 4, 16k sideways RAM, Watford 12 ROM board, Acorn 6502 coproc
BBC model B 32k issue 7, turboMMC, Opus Challenger 3 512k, Pi 3 coproc
USA Model B
BBC Master, Datacentre + HDD, pi co-proc, econet

MadeGray
Posts: 7
Joined: Wed Dec 27, 2017 4:44 pm
Contact:

Re: Beeb black plastic suround

Post by MadeGray » Sun Jan 13, 2019 9:31 am

ImageHi all,

After too many years in IT I now make furniture of all things it gives me time to play with my beebs!

One advantage is having a laser cutter in the workshop - sometime ago I made a few inserts but never quite had the time to finalise them but I will do this week I just need to tweak a few of the corners. And after the manic Christmas I’ve a much quieter January

On the attached I’ve engraved the caps lock etc which could be filled with white however would be better with a stamp or screen printing.

The material is really close to the original - they wouldn’t be self adhesive but a little spray of contact would secure.

I’ll post some updated images later in the week however as it’s my equipment etc the costs would be far lower than what’s been suggested for sure.

Thanks
John
Attachments
3364A38F-4A57-429F-8D8F-37AABB09E40E.jpeg
571D12E5-0136-4F1B-8F0E-4F97EE4EBA2F.jpeg
Last edited by MadeGray on Sun Jan 13, 2019 9:57 am, edited 1 time in total.
John Gray

BBC Master x2 with BeebSCSI, PI copro etc and lots of Goteks. A few Model B’s and a trusty Elk. Won’t mention the ZX80 and ZX81!

User avatar
marcusjambler
Posts: 501
Joined: Mon May 22, 2017 11:20 am
Location: Bradford
Contact:

Re: Beeb black plastic suround

Post by marcusjambler » Sun Jan 13, 2019 1:48 pm

sometime ago I made a few inserts
Definitely interested in some of these...
My suggestion is to remove the perforated ashtray section and leave it plain.

Marcus

MadeGray
Posts: 7
Joined: Wed Dec 27, 2017 4:44 pm
Contact:

Re: Beeb black plastic suround

Post by MadeGray » Sun Jan 13, 2019 3:02 pm

Good plan - would be easy to cut out with a craft knife if needed
John Gray

BBC Master x2 with BeebSCSI, PI copro etc and lots of Goteks. A few Model B’s and a trusty Elk. Won’t mention the ZX80 and ZX81!

RobC
Posts: 2410
Joined: Sat Sep 01, 2007 9:41 pm
Contact:

Re: Beeb black plastic suround

Post by RobC » Sun Jan 13, 2019 3:19 pm

Excellent stuff - very impressive work =D> =D>

Would definitely be interested in a few of these.

User avatar
tricky
Posts: 3098
Joined: Tue Jun 21, 2011 8:25 am
Contact:

Re: Beeb black plastic suround

Post by tricky » Sun Jan 13, 2019 11:35 pm

Looks great, I feel some belated presents.

MadeGray
Posts: 7
Joined: Wed Dec 27, 2017 4:44 pm
Contact:

Re: Beeb black plastic surround

Post by MadeGray » Tue Jan 15, 2019 5:03 pm

Hi all

Managed to get the sizes pretty much sorted today as can be seen from the attached.

I’ve got some laser etch ink stamp material now so was going to try to make a stamp for printing the caps lock etc.

The two I’ve cut today I’ve sent up to Mark @ retroclinic and he is going to test out the fit on the various cases he has.

I’ve a few beebs but mostly issue 7 and want to check sizes are still ok on all cases.

If Marks happy with them I’ll hope to do an order for Mark and he’s more than happy to handle the elements of orders shipping etc which I really want to stay away from!

I’ll update how things go over the next few days.

John
Attachments
1AC59D50-153F-48ED-8038-144BEB48E182.jpeg
4F9521D0-9328-463B-9BFB-1D6465D97BB9.jpeg
FBF6B1DB-1588-4D63-8C85-1AFC9C733460.jpeg
John Gray

BBC Master x2 with BeebSCSI, PI copro etc and lots of Goteks. A few Model B’s and a trusty Elk. Won’t mention the ZX80 and ZX81!

User avatar
leenew
Posts: 3779
Joined: Wed Jul 04, 2012 3:27 pm
Location: Doncaster, Yorkshire
Contact:

Re: Beeb black plastic surround

Post by leenew » Tue Jan 15, 2019 5:18 pm

Looking really good =D>

Lee


Post Reply