Page 1 of 2

FS: 16-bit IDE podules

Posted: Sun Apr 07, 2019 5:45 pm
by IanS
16-bit IDE V1c, these will fit into the backplane of any machine with a full-size podule bus. (e.g. A3x0/A4x0/A540/A5000/A7000/RPC). They have a 44-pin IDE connector for laptop style connection or for DOM's. They will also work (or at least they do for me) in an A305/A310 without a backplane.
If fitted into a machine without a backplane, the jumper link on JP3 must be removed, and the +5v red cable from the power supply connected to J4.
They also have provision for a 40-pin connector, though this is not populated, and if populated you can't easily use a right angle connector as pin 1 is towards the middle of the board.

edit: Please send a Private message (PM) if you can, no need to fill up this thread with requests. Please provide a postal address, so I can work out the postage. I'll update the title when I run out.

Podule only £20. Add £5 for a formatted 512MB Disk Module (DOM). Postage at cost.
IMG_20190103_220132_HDR.jpg
16-bit Podule.
IMG_20190103_220405_HDR.jpg
With DOM fitted.
Still available 2020-02-09.

Re: FS: 16-bit IDE podules

Posted: Sun Apr 07, 2019 6:41 pm
by markdryan
Could you put me down for one more of these plus a DOM?

Re: FS: 16-bit IDE podules

Posted: Sun Apr 07, 2019 8:13 pm
by letiss
Hello, I'd like one of these plus DOM.

Thanks
Luke

Re: FS: 16-bit IDE podules

Posted: Mon Apr 08, 2019 12:17 am
by Paul
Hey,

These would be ideal for my project. Any chance I could I go for 4 with the memory module DOM for each? If not, 2 would be cool.

Thanks!

Paul.

Re: FS: 16-bit IDE podules

Posted: Mon Apr 08, 2019 10:04 am
by JonC
Could you put me down for 2 please Ian?

Re: FS: 16-bit IDE podules

Posted: Mon Apr 08, 2019 11:19 am
by marcusjambler
Hi Ian

Please put me down for one with a DOM.

Marcus

Re: FS: 16-bit IDE podules

Posted: Sat Apr 20, 2019 3:21 am
by brown1d
Hi Ian

I would like 1. No need for DOM. Postage would be to the US.

Sorry no PM yet.

Re: FS: 16-bit IDE podules

Posted: Sat Apr 20, 2019 11:17 am
by IanS
brown1d wrote:
Sat Apr 20, 2019 3:21 am
I would like 1. No need for DOM. Postage would be to the US.

Sorry no PM yet.
PM sent with email contact details.

Re: FS: 16-bit IDE podules

Posted: Mon Apr 22, 2019 5:53 pm
by craigewan
I'd love two of these, each with the DOM as well. If you could let me know where and how to send the money.

Thanks, and thanks for making stuff like this

cheers

Paul

Re: FS: 16-bit IDE podules

Posted: Mon Apr 22, 2019 6:23 pm
by IanS
craigewan wrote:
Mon Apr 22, 2019 5:53 pm
I'd love two of these, each with the DOM as well. If you could let me know where and how to send the money.
PM sent

Re: FS: 16-bit IDE podules

Posted: Mon Apr 22, 2019 6:44 pm
by TimoHartong
Hi Ian,

I cann't send you a PM. Can I reach you somewhere I'm very interrested in this podule

Re: FS: 16-bit IDE podules

Posted: Mon Apr 22, 2019 6:58 pm
by IanS
TimoHartong wrote:
Mon Apr 22, 2019 6:44 pm
I cann't send you a PM. Can I reach you somewhere I'm very interrested in this podule
PM sent (with email contact details).

Re: FS: 16-bit IDE podules

Posted: Wed Apr 24, 2019 9:18 pm
by TimoHartong
Thanks Email send. Sorry for the delay

Re: FS: 16-bit IDE podules

Posted: Wed May 01, 2019 7:20 pm
by IanS
These are no longer for sale.

Re: FS: 16-bit IDE podules - SOLD OUT.

Posted: Fri Jun 14, 2019 4:20 pm
by carcher
Hi Ian,
Will you be doing any more IDE interfaces soon? My 20Mb ST506 in my A420/1 has dies so I need an IDE card upgrade.
THanks
Chris

Re: FS: 16-bit IDE podules - SOLD OUT.

Posted: Fri Jun 14, 2019 6:55 pm
by IanS
I'm hoping to have a few more built for the weekend of the Abug event. If there are any left after that weekend, I'll list them here.

Re: FS: 16-bit IDE podules

Posted: Fri Jul 05, 2019 8:38 pm
by IanS
I have some more boards for sale.

PM me for payment details. If you can't PM yet, post here and I'll send you some email contact details. Please let me know how long you need to reply to messages if you don't think you'll be able to reply within a day or so.

Re: FS: 16-bit IDE podules

Posted: Mon Jul 08, 2019 1:43 pm
by Sniffer
Hi Ian,

Just PM'd you with new address and to inform you I've paid but the web interface seems to be playing up. Not sure if the PM went or if it's stuck in the outbox.

let me know if you got it.

Cheers,
Mike.

Re: FS: 16-bit IDE podules

Posted: Mon Jul 08, 2019 3:16 pm
by danielj
PMs sit in outbox until read. :)

Re: FS: 16-bit IDE podules

Posted: Mon Jul 08, 2019 3:27 pm
by Sniffer
PMs sit in outbox until read.
Ahh, ok, I guess that makes sense :)

Re: FS: 16-bit IDE podules

Posted: Sat Jul 13, 2019 7:56 pm
by IanS
Sniffer wrote:
Mon Jul 08, 2019 1:43 pm
Just PM'd you with new address and to inform you I've paid but the web interface seems to be playing up. Not sure if the PM went or if it's stuck in the outbox.
Contact made via PM. Board delivered last week.

I still have boards available.

Re: FS: 16-bit IDE podules

Posted: Thu Jul 18, 2019 5:12 pm
by MarkMoxon
IanS wrote:
Fri Jul 05, 2019 8:38 pm
I have some more boards for sale.

PM me for payment details. If you can't PM yet, post here and I'll send you some email contact details. Please let me know how long you need to reply to messages if you don't think you'll be able to reply within a day or so.
Ian, I'd love a board with a DOM if one is still available, but I've only just opened my stardot account and can't PM yet. It's for an A410/1. If I could reserve one that would be great!

I can reply to messages really quickly.

Mark

Re: FS: 16-bit IDE podules

Posted: Thu Jul 18, 2019 5:36 pm
by IanS
MarkMoxon wrote:
Thu Jul 18, 2019 5:12 pm
Ian, I'd love a board with a DOM if one is still available, but I've only just opened my stardot account and can't PM yet. It's for an A410/1. If I could reserve one that would be great!
Email contact details sent via PM.

Re: FS: 16-bit IDE podules

Posted: Thu Jul 18, 2019 5:42 pm
by danielj
MarkMoxon wrote:
Thu Jul 18, 2019 5:12 pm

Ian, I'd love a board with a DOM if one is still available, but I've only just opened my stardot account and can't PM yet. It's for an A410/1. If I could reserve one that would be great!

I can reply to messages really quickly.

Mark
Mark, I'm enabling your PMs :)

d.

Re: FS: 16-bit IDE podules

Posted: Thu Jul 18, 2019 7:25 pm
by MarkMoxon
Thank you both. PMs and emails sent! :D

Mark

Re: FS: 16-bit IDE podules

Posted: Wed Dec 04, 2019 11:30 am
by IanS
These are still available if anyone wants one. Or have I hit peak IDE board ownership?

Re: FS: 16-bit IDE podules

Posted: Wed Dec 04, 2019 11:51 am
by danielj
Clearly not charging enough

d.

Re: FS: 16-bit IDE podules

Posted: Mon Dec 09, 2019 1:07 am
by stevebubs
I may need one or 2 but won't know until over Xmas period when I take stock of where I am in the rebuilds.

S

Re: FS: 16-bit IDE podules

Posted: Mon Dec 09, 2019 1:19 pm
by IanS
stevebubs wrote:
Mon Dec 09, 2019 1:07 am
I may need one or 2 but won't know until over Xmas period when I take stock of where I am in the rebuilds.
I can't see me running out before then.

Re: FS: 16-bit IDE podules

Posted: Mon Jun 01, 2020 10:48 pm
by 8271
I would like one as my Watford IDE Podule is pretty much dead (Doesn't detect anything anymore). I cannot PM as I have been a lurker for too long and not posted too much so far.

Thanks
Mike