Page 4 of 5

Re: PiTubeDirect signalconverter for BBC Micro

Posted: Fri Feb 10, 2017 7:30 pm
by fordp
mw0uzo wrote:Got the serial terminal working. It didn't work properly initially, I was scratching my head wondering why and wondering why the serial buffer chip was getting warm. GND and RX are the wrong way around on the silkscreen print - master version!
That would explain what killed my master!

Re: PiTubeDirect signalconverter for BBC Micro

Posted: Sat Feb 11, 2017 10:46 am
by sundbyk
fordp wrote:
mw0uzo wrote:Got the serial terminal working. It didn't work properly initially, I was scratching my head wondering why and wondering why the serial buffer chip was getting warm. GND and RX are the wrong way around on the silkscreen print - master version!
That would explain what killed my master!
Hi,

Sorry for this. I will send an email to all that has bought the Master version.
It should not kill your master if you don't connect the master's serial port to the Signal converter.
These lines go direct to the Pi.

Kjell S:

Re: PiTubeDirect signalconverter for BBC Micro

Posted: Sat Feb 11, 2017 8:05 pm
by fordp
May I suggest when you update the silk screen you use arrows as RX and TX are meaningless, both pins connect an TX to an RX.

Re: PiTubeDirect signalconverter for BBC Micro

Posted: Sat Feb 11, 2017 10:10 pm
by bsdnazz
Labels are local - RX is in and TX is out. RX at one end will be connected to TX at the other and vice versa.

Re: PiTubeDirect signalconverter for BBC Micro

Posted: Sat Feb 11, 2017 10:48 pm
by fordp
I know how. I just find arrows showing the direction of data transfer more useful.

Re: PiTubeDirect signalconverter for BBC Micro

Posted: Sun Feb 12, 2017 12:13 pm
by mw0uzo
fordp wrote:I know how. I just find arrows showing the direction of data transfer more useful.
Ha must be a preferences thing, I cursed the max3232 converter board for having arrows instead of RX and TX.

Re: PiTubeDirect signalconverter for BBC Micro

Posted: Wed Nov 22, 2017 12:49 pm
by Fartherof2
Hello

Ive only just come across this idea of using a Raspberry Pi as a second processor on the Beeb, sounds absolutely fantastic.

Kjell S, I was wondering if the you are still producing/selling the PITUBEDIRECT SIGNALCONVERTER FOR BBC MICRO?

I'm interested in the version for the BBC Micro Model b that sits under the Beeb for the Raspberry Pi Zero.

And if so, how do I purchase one from yourself?

Jon

Re: PiTubeDirect signalconverter for BBC Micro

Posted: Wed Nov 22, 2017 1:04 pm
by BigEd
Welcome Jon! Have a look towards the bottom of Kjell's overview page:
http://www.sundby.com/index.php/project/pitubedirect/

In passing, I'll mention a recent development or two by RobC: he's written a PDP-11 and a ZX81 emulator, to run as applications in the ARM Native flavour of the PiTubeDirect. So that's two more ways to enjoy your new second processor!

Re: PiTubeDirect signalconverter for BBC Micro

Posted: Wed Nov 22, 2017 1:06 pm
by sundbyk
Hi Jon,

They are still in demand and in production.
The easiest way is via my web shop. http://www.sundby.com/index.php/product ... bbc-micro/
If you have any problems please let me know.

Kjell S.

Re: PiTubeDirect signalconverter for BBC Micro

Posted: Wed Nov 22, 2017 3:02 pm
by Fartherof2
Brilliant, Thanks very much. :D

Re: PiTubeDirect signalconverter for BBC Micro

Posted: Wed Nov 22, 2017 6:49 pm
by paulv
sundbyk wrote:Hi Jon,

They are still in demand and in production.
The easiest way is via my web shop. http://www.sundby.com/index.php/product ... bbc-micro/
If you have any problems please let me know.

Kjell S.
My Anti-virus (ESET NOD32) seems to think the site has malicious code on it :-/

Website blocked
The web page is on the list of websites with potentially dangerous content.

Access to it has been blocked.

Re: PiTubeDirect signalconverter for BBC Micro

Posted: Wed Nov 22, 2017 7:11 pm
by sundbyk
paulv wrote:
sundbyk wrote:Hi Jon,

They are still in demand and in production.
The easiest way is via my web shop. http://www.sundby.com/index.php/product ... bbc-micro/
If you have any problems please let me know.

Kjell S.
My Anti-virus (ESET NOD32) seems to think the site has malicious code on it :-/

Website blocked
The web page is on the list of websites with potentially dangerous content.

Access to it has been blocked.
Hi,

This is probably because the site stores a lot of old 8 bit code.
I maybe need to put the mirrors behind password protections.
Can you bypass the block?

Kjell S.

Re: PiTubeDirect signalconverter for BBC Micro

Posted: Wed Nov 22, 2017 7:40 pm
by BigEd
(perhaps use different subdomains for the different purposes?)

Re: PiTubeDirect signalconverter for BBC Micro

Posted: Wed Nov 22, 2017 8:28 pm
by sundbyk
sundbyk wrote:
paulv wrote:
sundbyk wrote:Hi Jon,

They are still in demand and in production.
The easiest way is via my web shop. http://www.sundby.com/index.php/product ... bbc-micro/
If you have any problems please let me know.

Kjell S.
My Anti-virus (ESET NOD32) seems to think the site has malicious code on it :-/

Website blocked
The web page is on the list of websites with potentially dangerous content.

Access to it has been blocked.
Hi,

This is probably because the site stores a lot of old 8 bit code.
I maybe need to put the mirrors behind password protections.
Can you bypass the block?

Kjell S.
I have sent a request to ESET to get the site whitelisted again.

Thanks,

Kjell S.

Re: PiTubeDirect signalconverter for BBC Micro

Posted: Wed Nov 22, 2017 8:39 pm
by sundbyk
sundbyk wrote:
sundbyk wrote:
paulv wrote:
My Anti-virus (ESET NOD32) seems to think the site has malicious code on it :-/

Website blocked
The web page is on the list of websites with potentially dangerous content.

Access to it has been blocked.
Hi,

This is probably because the site stores a lot of old 8 bit code.
I maybe need to put the mirrors behind password protections.
Can you bypass the block?

Kjell S.
I have sent a request to ESET to get the site whitelisted again.

Thanks,

Kjell S.
That was fast. Got this from them just now.
---
Dear Kjell Sundby,

Thank you for your submission.
The site / IP address will be unblocked momentarily.

Regards,

ESET Malware Response Team
---
Nice service..

Kjell S.

Re: PiTubeDirect signalconverter for BBC Micro

Posted: Tue Dec 19, 2017 7:28 pm
by sundbyk
There are some problems with snow effects on some BBC Master's using the internal PiTubeDirect Signal Converter for the Master.
The ones connected to the external tube works fine.
It seem like are different version of chips in the Master causing the problem, but this need to be investigated.
To see if you have this problem run the program below and see if you get the snow effect.

10 MODE 0
20 GCOL 0,129
30 CLG
40 GOTO 40
Will investigate and find a solution for this. There may be more that needs to be fixed.

All people that have bought the Master version and have this problem will get a new card.
Since this is a "hobby" I would just ask to get back the cost of shipping the replacement.
I estimate to have new cards ready some time in January for shipping.

Hope nobody gets any problems with their Masters after this.

Kjell S.

Re: PiTubeDirect signalconverter for BBC Micro

Posted: Wed Jan 10, 2018 8:53 pm
by pbw72
Hi Kjell

Any progress with the new boards?

Many thanks

Paul

Re: PiTubeDirect signalconverter for BBC Micro

Posted: Sat Jan 13, 2018 3:35 pm
by mlouka
Not sure if he has had time to read your question as he’s busy putting the new cards together, which I guess answers your question ;).

Re: PiTubeDirect signalconverter for BBC Micro

Posted: Sat Mar 03, 2018 9:44 pm
by alienkidmj12
I'd love one of these for my master, any details?

Re: PiTubeDirect signalconverter for BBC Micro

Posted: Mon Mar 05, 2018 6:28 pm
by mlouka
alienkidmj12 wrote:I'd love one of these for my master, any details?
http://www.sundby.com/index.php/product ... nverter-2/

Re: PiTubeDirect signalconverter for BBC Micro

Posted: Wed Jun 27, 2018 11:47 pm
by Back2skooldaze
Hi Kjell, I want to buy 2 PiTubeDirect SC In tube connector under the BBC for only Pi Zero. Please can you tell me the total amount so i can send to your paypal :)
I live in the UK.
Thanks Andrew

Re: PiTubeDirect signalconverter for BBC Micro

Posted: Thu Jun 28, 2018 4:38 am
by danielj
Don't know how often Kjell reads this, but if you follow the link in the above post you can purchase from his webshop!

Re: PiTubeDirect signalconverter for BBC Micro

Posted: Thu Jun 28, 2018 8:04 am
by Back2skooldaze
Hi yes I want to purchase from his shop but he says to ask for total amount if buying more than 1 board ?

I'll just go ahead and buy 2 boards from his shop and fill out the shipping

If there's any problems I'm sure come back to me ☺

Re: PiTubeDirect signalconverter for BBC Micro

Posted: Thu Jun 28, 2018 10:18 am
by sundbyk
Back2skooldaze wrote:
Thu Jun 28, 2018 8:04 am
Hi yes I want to purchase from his shop but he says to ask for total amount if buying more than 1 board ?

I'll just go ahead and buy 2 boards from his shop and fill out the shipping

If there's any problems I'm sure come back to me ☺
Hi,

The webshop should work.
The reason for contact need was because of shipping cost.
Will find and change the text.

if you have any problem please contact me on kjell@sundby.com

Kjell S.

Re: PiTubeDirect signalconverter for BBC Micro

Posted: Thu Jun 28, 2018 11:58 am
by Back2skooldaze
Thank you Kjell S. :)

Re: PiTubeDirect signalconverter for BBC Micro

Posted: Thu Jun 28, 2018 10:03 pm
by JonC
Hmm,

Is there a problem with your order page?
In Edge and Firefox I just get grey circles with white circles spinning inside and am unable to continue.... :cry:

Re: PiTubeDirect signalconverter for BBC Micro

Posted: Thu Jun 28, 2018 10:23 pm
by marcusjambler
I'm experiencing an issue with the Sundby shop using Chrome.

When I input my details I get the following error message:

SyntaxError: Unexpected token < in JSON at position 0

On the checkout page.

Re: PiTubeDirect signalconverter for BBC Micro

Posted: Sun Jul 01, 2018 9:13 pm
by metaluna
I had the same problem with Windows 10 and Chrome. I emailed Kjell at Sundby who asked me to just sent payment via Paypal.
However, in chrome menu - more tools - clear browsing data, cured the error and allowed me to order through the web interface.

Re: PiTubeDirect signalconverter for BBC Micro

Posted: Wed Jul 11, 2018 1:01 am
by Back2skooldaze
Hi i am having some problems getting my retroPi zero to work with the BBC model B

I have just received the PitubeDirect board from Kjell and with that board in the tube connector under the BBC model B the Computers boots up when switching on but when i connect the raspberry Pi zero board to the PiTubeDirect the BBC won't boot up at all ?

I don't even get a biiirrrbeep and i get a black and white display on the screen ? The raspberry Pi zero is new which i have recently bought with the header pins already soldered on. I have left the jumper on the two pins as it came to me which i presume is to draw power from the BBC to power the raspberry Pi Zero.
Can anyone shed some light on this for me please?

I originally bought the Pi zero to use on my BBC Master but found the PiTubeDirect board does not fit under the tube connector on the BBC Master as there is not enough room to slide the board on to the tube pins ? If i'd known this i would have gone for the external fitting in the first place.

I've messaged the guy on ebay who i have bought the Pi zero from and asked if i can send it back to him for him to test to see if its working ok and if not can i have a replacement. I have no way how to test the Pi zero? I don't have a mini hdmi adapter to hook it up to my monitor. I unzipped the anaconda files to the sd card and was hoping for a plug and play but the BBC won't boot up at all with the Pi Zero connected to the PiTubeDirect SC board ?? The two boards fit only one way so there is no way i have connected them up wrong? Any help or advice is much appreciated :)

Re: PiTubeDirect signalconverter for BBC Micro

Posted: Wed Jul 11, 2018 1:49 am
by Back2skooldaze
Have i got the right files need in the root of the sd card for the Pi zero ?

I have unzipped all the files from the anaconda to the root of the sd card but am wondering do i need all of them or do i just need the setting for Pi zero only ???