System Clone design files....

discussion of games, software, hardware & emulators relating to the Acorn Atom and Acorn System machines.
Post Reply
Prime
Posts: 2723
Joined: Sun May 31, 2009 11:52 pm
Contact:

System Clone design files....

Post by Prime » Tue Jan 22, 2019 8:51 pm

Hi all since I have been asked about these :

Here's the Eagle design files for the following :

6502 clone board,
Video board combination of the 40 and 80 column boards, switchable between the two.
Backplane board.
Floppy / Econet board, 8271 based, Econet is implemented by a Master / Arch Econet module.
Gotek clone.
6809 clone board.
SystemCloneSchematics.zip
System clone schematics.
(1014.17 KiB) Downloaded 36 times

These should be able to be opened in any version of Eagle after 6, you should also be able to produce gerbers from them even using the free version, however you will need either the hobby or professional versions to modify them.

I'll update this post later with the design files for the CPLDs on the boards, and the AVR code for the Keyboard interface on the CPU board.

Right here's the Webpack projects for the 6502 & 6809 CPUs, the Video and Floppy boards. You'll need Xilinx webpack (14.7, which is the latest version) to compile these, sorry Webpack is a big download :(
SystemCloneXilinxFiles.zip
System clone Xilinx files.
(85.81 KiB) Downloaded 20 times


And here's the AVR source for the PS/2 -> System keyboard interface, which is on the CPU boards.
SystemCloneKeyboard.zip
System clone keyboard AVR source.
(26.31 KiB) Downloaded 23 times


If you have any questions about any of the above feel free to ask.....

Cheers.

Phill.
Last edited by Prime on Tue Jan 22, 2019 9:06 pm, edited 3 times in total.

bprosman
Posts: 288
Joined: Sun Mar 29, 2015 10:27 pm
Contact:

Re: System Clone design files....

Post by bprosman » Wed Jan 23, 2019 2:26 am

Thanks Phill for publishing these !

Kind regards, Bram
Last edited by bprosman on Mon Mar 04, 2019 8:17 am, edited 1 time in total.

User avatar
ask_nz
Posts: 126
Joined: Sun May 16, 2010 11:22 pm
Location: Auckland, New Zealand
Contact:

Re: System Clone design files....

Post by ask_nz » Sat Feb 09, 2019 7:36 pm

Wow - thanks Phil, that’s great :D
Ade

User avatar
ask_nz
Posts: 126
Joined: Sun May 16, 2010 11:22 pm
Location: Auckland, New Zealand
Contact:

Re: System Clone design files....

Post by ask_nz » Sun Mar 03, 2019 6:49 pm

Hi Phil,

What do you use to program your CPLDs?

Cheers

Ade
Ade

Prime
Posts: 2723
Joined: Sun May 31, 2009 11:52 pm
Contact:

Re: System Clone design files....

Post by Prime » Sun Mar 03, 2019 11:56 pm

ask_nz wrote:
Sun Mar 03, 2019 6:49 pm
Hi Phil,
*COUGH* Phill *COUGH*
What do you use to program your CPLDs?
Xilinx webpack and one of the clone Xilinx usb programmers like the one shown on hoglet's wiki page here : https://github.com/hoglet67/AtomBusMon/ ... requisites

Cheers.

Phill.

User avatar
ask_nz
Posts: 126
Joined: Sun May 16, 2010 11:22 pm
Location: Auckland, New Zealand
Contact:

Re: System Clone design files....

Post by ask_nz » Mon Mar 04, 2019 5:09 am

Sorry Phill (I'm not very observant most of the time).

...and thanks for the link - I'll check it out.

and again - many thanks for all your hard work :)

A.
Ade

bprosman
Posts: 288
Joined: Sun Mar 29, 2015 10:27 pm
Contact:

Re: System Clone design files....

Post by bprosman » Tue Mar 05, 2019 10:26 am

Hi Phill,

What toolchain do you use to compile the Keyboard (AVR) files ?
Atmel Studio ? Or "native" AVRgcc ?

Kind regards, Bram

User avatar
sirmorris
Posts: 771
Joined: Wed Feb 11, 2009 12:18 pm
Location: oxfordshire uk
Contact:

Re: System Clone design files....

Post by sirmorris » Tue Mar 05, 2019 11:58 am

Beautiful work as always, Phill!

Prime
Posts: 2723
Joined: Sun May 31, 2009 11:52 pm
Contact:

Re: System Clone design files....

Post by Prime » Tue Mar 05, 2019 2:40 pm

bprosman wrote:
Tue Mar 05, 2019 10:26 am
Hi Phill,

What toolchain do you use to compile the Keyboard (AVR) files ?
Atmel Studio ? Or "native" AVRgcc ?
Usually the AVRgcc toolchain, I'm on windows so I (historically) installed WinAVR, and then updated it with the more recent Atmel command line package.

Cheers.

Phill.

Post Reply