Page 1 of 1

Cross-32 : A Universal Cross Assembler for the Acorn Archimedes

Posted: Wed Mar 25, 2020 4:48 pm
by daveejhitchins
At last I've finished formatting, editing and correcting the User Guide for the Cross-32.

I've attached a .pdf of the User Guide to this post. I would have provided the document in MS Word format, however, I'm absolutely certain that it will lose its formatting when read on a Windows version of Word!

I'll be putting together a package of the Disc (3.5") and the User Guide if anyone would like a copy. The price will be material cost (TBA) and P&P.

I'm hoping to provide the Disc as near to the original as possible - including a serial number. More on that later.

I would be very grateful if someone had the time to read through the User Guide to spot any errors I've missed! Please feedback here.

Thanks - Dave H :D

IMG_0306.jpg

Cross-32 User Guide 1V3.pdf
(526.45 KiB) Downloaded 22 times


Edit1 (26-3-20) Corrected IanS' finds - plus found a few more! Now 1V1
Edit2 (26-03-20) More finds - Now 1V2
Edit3 (02-04-20) I've now been through the Guide, yet again, line by line. This should be good to go - ?
Edit (15-04-20) I can now supply copies: HD 3.5" Disc, User Guide and P&P within the UK for £10.00

Re: Cross-32 : A Universal Cross Assembler for the Acorn Archimedes

Posted: Wed Mar 25, 2020 5:21 pm
by IanS
shit.PNG
shit.PNG (3.34 KiB) Viewed 1098 times
"further information" section page 2
bit further down the page-
riscos.PNG
"O" and "0" (second one is a zero character). This appears in a few places. See page 4 also.
page 4
pc.PNG
hop.PNG
This should be HOF.
page 5
die.PNG
page 8
oxff.PNG
Am I being too picky?

I've highlighted the issues I found in the attached version of the file. (Some of the highlights may just be me not understanding). Hope it helps.

Re: Cross-32 : A Universal Cross Assembler for the Acorn Archimedes

Posted: Thu Mar 26, 2020 8:08 am
by daveejhitchins
IanS wrote:
Wed Mar 25, 2020 5:21 pm
shit.PNG
"further information" section page 2
bit further down the page-
riscos.PNG
"O" and "0" (second one is a zero character). This appears in a few places. See page 4 also.
page 4
pc.PNG
hop.PNG This should be HOF.
page 5
die.PNG
page 8
oxff.PNG Am I being too picky?

I've highlighted the issues I found in the attached version of the file. (Some of the highlights may just be me not understanding). Hope it helps.
Thanks, Ian . . . I was going 'snow-blind' reading it over and over. I'll correct the errors and update the first post attachment.

Dave H :D

Re: Cross-32 : A Universal Cross Assembler for the Acorn Archimedes

Posted: Thu Mar 26, 2020 8:45 am
by daveejhitchins
Updated with Ian's finds corrected. I also found a few more! Thanks again Ian.

Dave H :D

Re: Cross-32 : A Universal Cross Assembler for the Acorn Archimedes

Posted: Thu Mar 26, 2020 8:54 am
by IanS
Doesn't look like you downloaded my verion with issues highlighted.

e.g.
equ.PNG

Re: Cross-32 : A Universal Cross Assembler for the Acorn Archimedes

Posted: Thu Mar 26, 2020 8:58 am
by IanS
zero.PNG
this should be "...the <> indicate..."

Re: Cross-32 : A Universal Cross Assembler for the Acorn Archimedes

Posted: Thu Mar 26, 2020 11:10 am
by daveejhitchins
IanS wrote:
Thu Mar 26, 2020 8:54 am
Doesn't look like you downloaded my verion with issues highlighted.

e.g.
equ.PNG
No, sorry, I didn't realise there were more that you'd shown :oops:

Dave H :D

Re: Cross-32 : A Universal Cross Assembler for the Acorn Archimedes

Posted: Thu Mar 26, 2020 11:47 am
by IanS
daveejhitchins wrote:
Thu Mar 26, 2020 11:10 am
No, sorry, I didn't realise there were more that you'd shown :oops:
Sorry, I should have made it clearer. I'd been editing my original post as I found any issues, but seemed easier to just upload an annotated file.

Re: Cross-32 : A Universal Cross Assembler for the Acorn Archimedes

Posted: Thu Mar 26, 2020 12:23 pm
by daveejhitchins
OK . . . It seems there are lots still to find - so far, searching for I for 1 - O for 0 - S for 5 - Z for 2 and others found on the way, the total this time around is 43 :oops:

First post updated . . .

Dave H :D

Re: Cross-32 : A Universal Cross Assembler for the Acorn Archimedes

Posted: Thu Mar 26, 2020 12:30 pm
by 1024MAK
daveejhitchins wrote:
Thu Mar 26, 2020 12:23 pm
OK . . . It seems there are lots still to find - so far, searching for I for 1 - O for 0 - S for 5 - Z for 2 and others found on the way, the total this time around is 43 :oops:

First post updated . . .

Dave H :D
Job for life? :lol:

Mark

Re: Cross-32 : A Universal Cross Assembler for the Acorn Archimedes

Posted: Thu Mar 26, 2020 12:46 pm
by IanS
Page 29
incl.PNG
This should be - INCL “<Projects$eg1>.AsM.IO”

Re: Cross-32 : A Universal Cross Assembler for the Acorn Archimedes

Posted: Wed Apr 01, 2020 5:46 pm
by BeebMaster
IanS wrote:
Wed Mar 25, 2020 5:21 pm
Image
No, that's right, my keyboard has one right here:
IMG_6391.jpeg

Re: Cross-32 : A Universal Cross Assembler for the Acorn Archimedes

Posted: Thu Apr 02, 2020 7:19 am
by daveejhitchins
Updated the first post with the latest edition 1V3. Spent a lot more time going through and picking out all the missing/extra full stops and commas.

Dave H :D

Re: Cross-32 : A Universal Cross Assembler for the Acorn Archimedes

Posted: Wed Apr 15, 2020 6:25 am
by Groot
PM me details when available Dave - I’d like to give it a whirl!
Mark

Re: Cross-32 : A Universal Cross Assembler for the Acorn Archimedes

Posted: Wed Apr 15, 2020 8:43 am
by daveejhitchins
PM sent . . .

Dave H :D

Re: Cross-32 : A Universal Cross Assembler for the Acorn Archimedes

Posted: Sat May 16, 2020 8:15 pm
by TimoHartong
Hello I installed it on my A5000 ( RO 3.1 ) I get the message : "This is an incomplete version" what did I do wrong ?.

Re: Cross-32 : A Universal Cross Assembler for the Acorn Archimedes

Posted: Sat May 16, 2020 10:13 pm
by daveejhitchins
It may need a serial number added! . . . I have the program and have asked IanS to take a look at it for me.

More info as we find out.

Dave H :D

Re: Cross-32 : A Universal Cross Assembler for the Acorn Archimedes

Posted: Thu May 21, 2020 11:41 am
by TimoHartong
Any progress on this issue. I'm very eager to test it ;-)

Re: Cross-32 : A Universal Cross Assembler for the Acorn Archimedes

Posted: Fri May 22, 2020 8:52 am
by daveejhitchins
Yes . . . The answer is to run what you have through the Serial Number App.

I'm trying to get a copy that I can eMail you. Let you know ASAP. I should ask: will you be able to get the image I send you onto your machine - and, which machines do you have?

Dave H :D

Re: Cross-32 : A Universal Cross Assembler for the Acorn Archimedes

Posted: Fri May 22, 2020 9:42 pm
by TimoHartong
Mail is send...