Page 2 of 2

Re: Dutch TechSat on 6th of June.

Posted: Sun Jun 07, 2015 9:34 pm
by CMcDougall
looks like a great time had by all 8)
multiwizard wrote:see almost 7 hours in 2:11 minutes...
:lol: =D> Wim, you forgot the Benny Hill 'Yakety Sax' music :-s
https://www.youtube.com/watch?v=MK6TXMsvgQg

Re: Dutch TechSat on 6th of June.

Posted: Sun Jun 07, 2015 10:00 pm
by Multiwizard
CMcDougall wrote:looks like a great time had by all 8)
multiwizard wrote:see almost 7 hours in 2:11 minutes...
:lol: =D> Wim, you forgot the Benny Hill 'Yakety Sax' music :-s
https://www.youtube.com/watch?v=MK6TXMsvgQg
Indeed, it did cross my mind after I uploaded the silent version, I am still thinking of changing this video with the Benny Hill music... :lol:

Perhaps I'll do it tomorrow... :mrgreen:


Greetings, Wim... :-)

Re: Dutch TechSat on 6th of June.

Posted: Mon Jun 08, 2015 6:40 am
by Multiwizard
Hi,

I have uploaded the time-lapse again this time with the Benny Hill tune... :mrgreen:

I also replaced the hyper-link in my previous post... 8)

https://www.youtube.com/watch?v=yaYIWGkCJEM


Greetings, Wim... :-)

Re: Dutch TechSat on 6th of June.

Posted: Mon Jun 08, 2015 6:48 am
by roland
:lol: :lol: :lol: =D>

Re: Dutch TechSat on 6th of June.

Posted: Mon Jun 08, 2015 8:01 am
by hoglet
Thanks for all the updates, it's so nice to see such a wide range of activities.

Kees, looks like you have some cool stuff in the pipeline. :D

Can you say a bit more about Jim Bagley's video player? Is it a port of this:
https://www.youtube.com/watch?v=UKkg1hm2nog
What sort of screen mode / resolution do you think it will run at on the Atom?

Dave

Re: Dutch TechSat on 6th of June.

Posted: Mon Jun 08, 2015 8:08 am
by oss003
Hi Dave,
hoglet wrote:Can you say a bit more about Jim Bagley's video player? Is it a port of this:
https://www.youtube.com/watch?v=UKkg1hm2nog
What sort of screen mode / resolution do you think it will run at on the Atom?
Yep, that's the one. It's running in CLEAR 2 but I'm having some troubles with starting the player. When I start it to play DRAG4, it generates an AtoMMC error $49. When after this error I type A=FIN"DRAG4";SHUT A it is running fine.
The player uses the open_file_read and read_block routines. Here is a test for the player playing some Kung-fu video:

https://www.youtube.com/watch?v=x_Hc-0PnICY

PS It runs fine in Atmulator.

Greetings
Kees

Re: Dutch TechSat on 6th of June.

Posted: Mon Jun 08, 2015 8:25 am
by hoglet
oss003 wrote: Here is a test for the player playing some Kung-fu video:
https://www.youtube.com/watch?v=x_Hc-0PnICY
That looks amazing!
oss003 wrote: PS It runs fine in Atmulator.
What you need for situations like this is an Atom Bus Monitor :lol:

Let me know if you would like me to have a go at debugging it. I was just thinking yesterday that what I really need to properly test the Bus Monitor was a real problem that for some reason was not reproducible in Atomulator. Sounds like you have just that.

Dave

Re: Dutch TechSat on 6th of June.

Posted: Mon Jun 08, 2015 8:38 am
by oss003
Yes, this is a real(y nice) problem ... ;)

The Atombus monitor looks promising, it would be great if you could add the Watchr and Watchw instructions. I used these a lot in Atomulator to check all AtoMMC registers.

Greetings
Kees

Re: Dutch TechSat on 6th of June.

Posted: Mon Jun 08, 2015 10:19 am
by Baggers
Hi guys, thanks for your help on getting this to work on a real Atom :)

Re: Dutch TechSat on 6th of June.

Posted: Mon Jun 08, 2015 10:53 am
by Prime
I've got to admit, this is something I've often thought of implementing for the 6502 (and 6809) using a CPLD and an AVR/PIC/PIC32.

Would be cool also to have it plugged into the CPU socket, or at least to be able to tristate the CPU so that you could do stuff like set all address lines to value X, which is really useful when trying to work out if your address decoding is working. I had an AVR based probe that I knocked up to do this, but it had to drive the phi2 line, I guess using a CPLD / FPGA you do not have this restriction.

Cheers.

Phill.