stardot.org.uk

great stuff in this image

I can run doom it starts show the shareware version message and start loading the ...........
after a wile it will drop me back to the command line having the error "bad command" in a low res mode.

Hi Jason, I've tried writing the 314mb dat file to sd card with win32diskimager and followed the commands you listed. After the Ctrl-Break step it comes up "NoMBR!" on the top left of the screen followed by "*". I'm guessing this is because the ADFS image file isn't in the forma...

https://i.ibb.co/QQ00QkG/Whats-App-Image-2019-06-18-at-12-33-18-PM.jpg https://i.ibb.co/k1hySLh/d99a984c-d724-4e23-b973-a6009beb023d.jpg https://i.ibb.co/87g73Z5/IMG-20190529-223537.jpg https://i.ibb.co/dgctVfH/IMG-20190420-141045.jpg https://i.ibb.co/NKFbs7Z/IMG-20190430-142626.jpg https://i.ibb.c...

Great setup os/2 look great on that IBM PS/2 hardware even you have the correct mouse for the job
Makes me whant to install os/2

it could be super fun installing from the 30 floppy disk the os is one and have a bad one in the middle of the install .

remember me when i installed os/2 for the first time and also windows 95

i could love to get that link also

Another question about the ROM i tested it on the sideways ROM slot and work great :D. Have seen that is very easy to build an adapter to replace the MegaROM for a 27c010 EPROM. Is possible to replace the ADFS on the megarom for this modified version ?. I have done that, in a sense. I have one of t...

The zx spectrum next is quite cool and very nice case, but i prefer the zx evolution. Purchased it a few years ago and is a lot of fun, also is not just an fpga have a 14mhz real z80, ide, floppy, expansion slots, serial ,parallel can take ps/2 keyboard an mouse or use a real zx spectrum keyboard, s...

Have a master 128, and a MICRO-SPI MMC from retroclinic uses microsd cards and also a pitube. Is this one of the ones that connects to the user port? Assuming it is, one of the ROMS in the attached ZIP should be suitable. The one named SD is the one that expects the MMC on the normal user port, SD2...

The sd card image worked fine, managed to get ADFS into an eprom and placed in the second socket on the master. Changed the jumper to enable the socket for some reason shows to times in slot 6 and 7. Unpluged the original ADFS and inserted the new one and now the sd card shows as a hard disc :D. Als...

There is a pre-built raw SSD card image linked earlier in the thread: https://stardot.org.uk/forums/viewtopic.php?f=3&t=10519&p=136036#p136036 You can write this to the SD card using win32diskimager This will destroy any existing data on the SD Card. As far as I remember, it contains: - a 1...

Yes it goes to the user port, and have an eprom also that show up as mmc on the *roms command. After burning the ADFS rom and inserting it into a socket it should show up as ADFS in the *roms command ?. Then how the partition is formatted then and how do you copy software to the partition is posible...

Have a master 128, and a MICRO-SPI MMC from retroclinic uses microsd cards and also a pitube. Now how to burn eproms (have an eprom programmer), what i never have done is using git and compile stuff from there. Need some help on how the partition layout on the microsd card must be (partition types) ...

Sorry to reanimate this old thread, i read it from the start but got lost.
This is about using the Micro MMC thingy to get an ADFS hard disc image mounted on the micro ?.
If this is the case how it is done, theres a little guide or something on how to use the software ?.

Following the step you suggested adffs works fine.
I have packman installed and check that zlib is installed is the last version.
How i can update the system zlib is a different one ?.

I have riscos 4.02 installed on a strongarm riscpc. downloaded the last release of ADFFS 272, i have an issue running the software. If i doubleclick on the icon it will give an error like this: https://i.ibb.co/0YwJf8H/IMG-20190803-021853.jpg https://i.ibb.co/VJDZ0Bt/IMG-20190803-014649.jpg After pr...

Ok this is how i do the install. Started first press F12 and in the text thingy typed "configure CDROMdrives 1" this enabled the cdrom drive. Burned a normal cd in windows and inside it copy the install zip downloaded from here:http://www.riscos.com/ftp_space/400/files/ro4install.zip Then ...

You should be able to configure a RAM disk and copy it across to that? In Tasks find RAM disc, click to the right and drag it out so there's adequate space for your SparkFS and the RO4Install.zip to be extracted into. Once you extract RO4Install, shift double-click on it, then navigate to the Data,...

TimoHartong wrote: ↑

Thu Aug 01, 2019 7:12 pm

With a bit of luck you can configure a static ip-address download an ftp program and download it. I'm not really familiar with riscpc so I cann't help you with that

Anyway my hardisk is not formated so there's no place to download the files if i use the network.

TimoHartong wrote: ↑

Thu Aug 01, 2019 6:47 pm

If I look to the pictures you have most likely a network card installed. But I cannot see if it is only coax or RJ-45.

The Ethernet module is RJ-45 and coax.

IanS wrote: ↑

Thu Aug 01, 2019 4:55 pm

soviet wrote: ↑

Thu Aug 01, 2019 4:27 pm

I could love to source a new power button, mine is missing.

https://www.ebay.co.uk/i/183727788785
(not my sale, but I do have one, and it does look nice, and fits well)

Thanks for the link, the seller don't seems to ship to the us.
Send him a message if he is willing to do so.

Yes, the plastic lip in the back is only half broken, and the front screw still have the washer thingy probably i will be able to figure a fix using epoxy. I could love to source a new power button, mine is missing. Found on the www that you have to do a configure cdrom 1 thingy from the command lin...

Ok replaced the broken power supply switch. Still can't belive that the massive powersupply is hold to the case by a single screw, i still have to see how can i fix this so the psu si not loose. https://i.ibb.co/fNKj7F6/IMG-20190731-234030.jpg Removed the original battery cleaned and soldered a coup...

Hi guys got a two slices riscpc from ebay, it was a "mystery" auction in the listing says for projects it have some pictures turned on so it was not a 100% Russian roulette kind of auction, and the $$$ don't ended up going very high. The battery don't seem to have leak but is getting a lit...

Well, I have 2 x teletext wedges, 6 x 6502 copro and one Z80 copro. None are currently BBC cream, if you know what I mean, but I guess they will clean up. For your purposes, I guess the teletext option is best. No idea what one is worth, except there is one on CJE for £59, so I'll take a stab at £3...

Super awsome game pack!, wish i can run them on the bbc

What do you want it for, it is just the actual case you want, not the contents? If that's the case (no pun intended) I guess a teletext option would be best as they are the least useful. I'll dig them out on Monday and report back. No idea what a fair price for a tt wedge is but they are sat there ...

Sniffer wrote: ↑

Fri Jul 05, 2019 2:07 pm

Hi,
I've got wedges but they are all populated.

Mike.

Thanks MIKE, what is the cheapest one do you have ?

This is as cheap as you are likely to find anything on eBay unless you are willing to wait. https://www.ebay.co.uk/itm/BBC-computer-Teletext-adaptor/143318961247?_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20160908105057%26meid%3D08eb593256fa471bb4d49b324a471590%26pid%3D100675%26rk%3D...

Pleaseeeeeeee