stardot.org.uk

Order a few on Ebay they will cost you less than your petrol to collect the game and bring it back

Interesting to read you. My own small experience with British Uni dates from 1995. After graduating with difficulties (although I had a baccalauréat, section D (biology, physics, maths in that order) I spent 2 years afterward studying Law, at the Uni, not the best to keep one's knowledge in Mathemat...

danielj wrote:I was just talking about the on-board IDE

d.

Ah ok ... to me you were answering to the previous thread where the author states 'A3010' ... but then the thread is about turning A3010s into A3020s so it makes sense

I do not know what the Simtec board uses but I can guarantee I have 2 partitions about 500 Mbytes each with a 1 Gbyte CF card.
I wonder if it is not with Simtec you can get up to 8 partitions ...

Elminster wrote:16+8+some more.

Slip of the tongue, just watching video about 68000, although some argue that is really 32 bit and not 16.

Not false, at the cost of additional cycles.
Link please, can be interesting if instructive.

16 bits ? Where ?

There were 2 listed by Ifel for GBP40 each and they sold fast !
With 1 Gbyte ... brand new.
I must have missed them for 5 seconds at most ...

Valuable infos !

Please show us 3)

Done.

I have now 2 A3010s with the same symptoms.
One is a normal A3010, one is equiped with an Adelaide daughterboard.
Videos of the failure uploaded on YT ...

Same result unfortunately.
No floppy drive on thiq machine.
I will install one in a few hours.

I mesure South West of the motherboard, where it is written -12VU 0V +5V +12VU

Thanks for your help.

Duel tomorrow morning at dawn near the abandoned castle in the forest ...
Bring your ADA95 course book and your COBOL manual.

IanS wrote:

Zarchos wrote:And your ARM3 upgrade can have a floating point unit, too !

No, that's just the socket where it fits into the motherboard.

Yes I had corrected while you were sending your message.

Excellent price, really ! You don't need any software for the ARM3 when running RO 3 : if you want to slow down your machine just press F12 and CACHE OFF then ENTER CACHE ON will set the cache on again Any DP software will do that with the mouse, it installs on the icon bar and most of the time you ...

I failed...
I have mesured the voltages at the 5 an 12 volts and I get 5.10 and 10.85 ... any idea what could be wrong ?
And here is what I get on screen :

1024MAK wrote:Tweezers?
Google found these pictures

Mark

That's it. And I knew it. I am much better at reading or listening than writing or speaking.
Thanks.

Oh oh bring the pop corn and watch ...

Remind me if I don t come back here posting some details. Sthing I read on Amibay for sbdy who wanted to change a Motorola cpu for a faster one in an accelerator board : he had to change a chip acting with the memory chips because it was now too slow for the new higher frequency. I wonder if it coul...

Thanks for that suggestion. I have booted + R to reset CMOS. That has allowed the disc to be renamed. I have dropped the saved configuration file on the configuration utility which restored most but not all of the configuration settings and it does not run !Boot although the configuration is set to...

In my garden, with the birds singing, step one : remove the keyboard connectors (was easy : pins were very corroded and at the factory they were soldered with a gap of a few millimeters between the bottom of the plastic bit and the motherboard : franticaly moving the connectors back and forth ended ...

I will add that with an ARM3 fitted you should not see a black screen when accessing the diskette drive when in VGA mode. This means you have RO 2 fitted : it doesn't know you have a CPU with cache, and you need a small app to turn it on. Not the case with RO 3 where by default if you have an ARM3 i...

No worries. xltardy Xavier Louis Tardy and I use gmail. For your mouse socket did you neutralize the leaking with vinegar ? Do it, then let it dry a whole day. Then spray a special electronic contact spray. Again let it dry (you can shake the whole machine to get rid of the excess of fluid) then see...

No additional ROM fitted (next to the RO roms) which might contain a locker ?
Are you really sure you had a no boot and still it was greyed out ?
Could you try booting up the machine with DEL and then configure one IDE hard drive and check ?

Very good news indeed !

I don't get it. You didn't use the onboard controller and used a podule and managed to format with Acorn software ? So it is a Castle podule you used ? Maybe in that case you need to use the specific Castle tool to change the HD name ... Have you checked on the excellent Chris' Acorn website now hos...

A book which I believe I will love reading because at last a link is made between promoting some people, and political propaganda, and media manipluation.
Read the back cover.

Some Tilt magazines where there is an article about the Archimedes : - April 1989 about DTP : 1497700470560-1631269432.jpg 1497700408942567066943.jpg Say hello to Ashiv, the official Acorn dealer : 1497701678099764628492.jpg - December 1990 : 1497701365806274214894.jpg There is an article about tank...

Zarchos, I hope you go running every day? To combat all those pastries I've seen in your photos :lol: Dave H :D Bought yesterday evening after one hour biking with my neighbour's son, in the town and the surroundings (Check TransOise with Google). I still wonder why I haven't fled Paris many years ...

Much received this week but won t show everything, who cares about an Amiga600 with a Vampire 1 anyway ? In use the WB is still atrociously slow and unfriendly compared to an 8 Mhz Archie running RO3 14976847247191296361596.jpg 1497684872389192375767.jpg Pravetz 8D is a Bulgarian clone of the Tanger...

Just received ... for the museum