Search found 70 matches

by Bagpuss
Wed Jun 20, 2018 4:19 pm
Forum: hardware
Topic: BeebSID 2.4 design files.
Replies: 25
Views: 1289

Re: BeebSID 2.4 design files.

I've finally managed to get my board built as well.
Many, many thanks to both Rob and Phill. I've only been waiting 7 years... :D
by Bagpuss
Wed Jun 06, 2018 10:35 am
Forum: upcoming and recent events & exhibitions
Topic: ABUG SOUTH 1 to 3 June 2018 (Hampshire) BOOKING THREAD
Replies: 125
Views: 6182

Re: ABUG SOUTH 1 to 3 June 2018 (Hampshire) BOOKING THREAD

Huge thanks to Robert for organising this, and for his help in getting the 1MHz Bus on my B working again. Massive thanks to Phill for all his help is getting the two Apple IIs up and running again. A shining example of what makes this community such a great place to be involved in. Thank you, both....
by Bagpuss
Wed Jun 06, 2018 10:31 am
Forum: other vintage computer hardware, software and games
Topic: Some Apple II's needing TLC at Hampshire ABUG
Replies: 11
Views: 487

Re: Some Apple II's needing TLC at Hampshire ABUG

Just wanted to say a massive thanks to Phill for all his help is getting the two Apple IIs up and running again.
A shining example of what makes this community such a great place to be involved in.

Thank you, Phill.
by Bagpuss
Fri Jun 01, 2018 5:00 pm
Forum: upcoming and recent events & exhibitions
Topic: ABUG SOUTH 1 to 3 June 2018 (Hampshire) BOOKING THREAD
Replies: 125
Views: 6182

Re: ABUG SOUTH 1 to 3 June 2018 (Hampshire) BOOKING THREAD

Having a really bad journey up from Cornwall. Too many emmets trying to get back home after half term. ☹️

How long will we have access to the room tonight? Debating whether to just turn up early tomorrow rather than set up tonight.
by Bagpuss
Wed May 30, 2018 11:06 am
Forum: other vintage computer hardware, software and games
Topic: Some Apple II's needing TLC at Hampshire ABUG
Replies: 11
Views: 487

Re: Some Apple II's needing TLC at Hampshire ABUG

I've bought some 0.47uf X2s, and have 0.1uf for doing beebs, just gotta remember to bring them...... Cheers. Phill. Thanks Phill. Very much appreciated. I'll have eyes on the machines on Thursday evening. Will take the PSUs apart, and see what's in there. Hopefully, they won't be riveted. Am going ...
by Bagpuss
Mon May 21, 2018 10:58 am
Forum: other vintage computer hardware, software and games
Topic: Some Apple II's needing TLC at Hampshire ABUG
Replies: 11
Views: 487

Re: Some Apple II's needing TLC at Hampshire ABUG

Found the following page which talks about the PSUs:
http://www.appleii-box.de/D04_allabotpowersupplies.htm

Can't find anything specific about the PSU in the original Apple II, with regards to the capacitors.
Have posted to a couple of Apple II forums, so hopefully will find the answers.
by Bagpuss
Tue May 15, 2018 11:51 am
Forum: other vintage computer hardware, software and games
Topic: Some Apple II's needing TLC at Hampshire ABUG
Replies: 11
Views: 487

Re: Some Apple II's needing TLC at Hampshire ABUG

The Power supplies will be screwed into the case, would it be possible to remove them from the cases and check if they are screwed or riveted together? If they are screwed would it be possible to open the PSU up and take a good quality picture of the insides of the PSUs, that way we can hopefully i...
by Bagpuss
Mon May 14, 2018 12:41 pm
Forum: other vintage computer hardware, software and games
Topic: Some Apple II's needing TLC at Hampshire ABUG
Replies: 11
Views: 487

Some Apple II's needing TLC at Hampshire ABUG

Hi All, I've already mentioned this briefly in the ABUG thread, but thought this would be a better place for the discussion. One of my best friends passed away just over a year ago from a brain tumour. We'd worked together at Sun for many years, and I regularly stayed with him and his family when I ...
by Bagpuss
Mon Apr 23, 2018 12:29 pm
Forum: upcoming and recent events & exhibitions
Topic: ABUG SOUTH 1 to 3 June 2018 (Hampshire) BOOKING THREAD
Replies: 125
Views: 6182

Re: ABUG SOUTH 1 to 3 June 2018 (Hampshire) BOOKING THREAD

I know this a bit off topic, but I just wanted to put out a request for some help during the meet. One of my best friends passed away just over a year ago from a brain tumour. We'd worked together at Sun for many years, and I regularly stayed with him and his family when I was working out of the Cam...
by Bagpuss
Mon Apr 16, 2018 10:01 am
Forum: hardware
Topic: Scope recommendations
Replies: 16
Views: 883

Re: Scope recommendations

Been meaning to update on this, but currently got some personal issues going on, so not been around.
Went with the Rigol 1054Z, as Rigol-UK (aka Telonic) offered me a reasonable discount.
by Bagpuss
Mon Apr 16, 2018 9:54 am
Forum: upcoming and recent events & exhibitions
Topic: ABUG SOUTH 1 to 3 June 2018 (Hampshire) BOOKING THREAD
Replies: 125
Views: 6182

Re: ABUG SOUTH 1 to 3 June 2018 (Hampshire) BOOKING THREAD

I'm already on the list, but will definitely be attending for all 3 days. I'd also like a full table.
by Bagpuss
Mon Apr 16, 2018 9:38 am
Forum: hardware
Topic: Master level shifter for PiTube Direct won't fit with VideoNuLA
Replies: 27
Views: 1370

Re: Master level shifter for PiTube Direct won't fit with VideoNuLA

Can someone link to bought parts, and what they did to make stuff fit? I bought these , which make it fit perfectly. You need the 12/3mm versions, as there is a choice in a dropdown. I unsoldered the existing pins, and replaced them with the above. If you don't have a desoldering gun, you will prob...
by Bagpuss
Fri Apr 13, 2018 10:44 am
Forum: hardware
Topic: Master level shifter for PiTube Direct won't fit with VideoNuLA
Replies: 27
Views: 1370

Re: Master level shifter for PiTube Direct won't fit with VideoNuLA

I managed to get an ADFS hard drive, a VFS hard drive, PiTubeDirect, upgraded PSU and a wireless mouse interface (SmallyMouse2) inside the case; there's also econet and MultiOS in there... and I didn't even need to stick anything to the lid :) I need to get a VideoNuLA soon :) You're just showing o...
by Bagpuss
Thu Apr 12, 2018 6:47 pm
Forum: hardware
Topic: Master level shifter for PiTube Direct won't fit with VideoNuLA
Replies: 27
Views: 1370

Re: Master level shifter for PiTube Direct won't fit with VideoNuLA

It's getting a bit tight in my case already.

We've got the VideoNuLA, PiTube Direct, Econet, MultiOS and Internal DC.
Next project is to build a BeebSID to go along with my BeebOPL and see if I can fit both of them in the case. :D
by Bagpuss
Thu Apr 12, 2018 2:56 pm
Forum: hardware
Topic: Master level shifter for PiTube Direct won't fit with VideoNuLA
Replies: 27
Views: 1370

Re: Master level shifter for PiTube Direct won't fit with VideoNuLA

Got it all to fit. Found some 12mm pins on eBay and they are perfect:
pitube-nula.jpg
The PiTube just clears the VideoNuLA and leaves plenty of space above for the internal DC.
by Bagpuss
Wed Apr 11, 2018 3:44 pm
Forum: for sale / freebies
Topic: BeebSCSI mini
Replies: 178
Views: 14469

Re: BeebSCSI mini

flynnjs wrote:3rd batch are now fully dispatched.
Mine just arrived. Big thumbs up. :-)
by Bagpuss
Tue Apr 10, 2018 2:55 pm
Forum: hardware
Topic: Master level shifter for PiTube Direct won't fit with VideoNuLA
Replies: 27
Views: 1370

Re: Master level shifter for PiTube Direct won't fit with VideoNuLA

...snip... , otherwise it will infringe on the CF card adapter that's attached to the DC. Just a thought, a short IDE extension cable would move the adapter out of the way? Good thought, JonC. I did think about doing that, but it then makes fitting the BeebSID and/or BeebOPL inside the case lid pre...
by Bagpuss
Mon Apr 09, 2018 12:41 pm
Forum: hardware
Topic: Master level shifter for PiTube Direct won't fit with VideoNuLA
Replies: 27
Views: 1370

Re: Master level shifter for PiTube Direct won't fit with VideoNuLA

Thanks Rob. Much appreciated. I've done a bit of a of bodge, thus: connector-bodge.jpg but this makes the copro too tall for the case to shut, as I've got an internal DataCentre mounted to the underside of the upper case. internal-dc.jpg The standard 65C02 copro fits perfectly, which means that the ...
by Bagpuss
Mon Apr 09, 2018 9:45 am
Forum: hardware
Topic: Master level shifter for PiTube Direct won't fit with VideoNuLA
Replies: 27
Views: 1370

Master level shifter for PiTube Direct won't fit with VideoNuLA

Hi All, I've just received my two Master level shifters for the PiTube Direct, and found a small problem. My Master has a VideoNuLA installed, and the level shifter boards won't fit as the VideoNuLA is too tall. I should have looked more closely at the images of the adapter board. I just assumed tha...
by Bagpuss
Fri Apr 06, 2018 9:16 am
Forum: hardware
Topic: Palettemate / enhanced video ULA with 4096 colours
Replies: 575
Views: 46337

Re: Palettemate / enhanced video ULA with 4096 colours

Is this what I need to program it myself? https://www.ebay.co.uk/itm/Altera-Mini-Usb-Blaster-Cable-For-CPLD-FPGA-NIOS-JTAG-Altera-Programmer-NEW-UK/192169107304?_trkparms=aid%3D222007%26algo%3DSIM.MBE%26ao%3D2%26asc%3D49129%26meid%3Ddf560351ebfd4083aafa74da94eb5907%26pid%3D100005%26rk%3D6%26rkt%3D6...
by Bagpuss
Thu Apr 05, 2018 1:09 pm
Forum: for sale / freebies
Topic: BeebSCSI mini
Replies: 178
Views: 14469

Re: BeebSCSI mini

I might be intersted in one of these, but could I please have some further details including price. Thanks. All the units from the 3rd production run are now spoken for. There is a waiting list for the 4th batch, but no confirmed production date as yet. Cost of the previous units was £37.95 each (i...
by Bagpuss
Thu Apr 05, 2018 10:32 am
Forum: hardware
Topic: Scope recommendations
Replies: 16
Views: 883

Re: Scope recommendations

Thanks for all feedback. Much appreciated. :D
by Bagpuss
Wed Apr 04, 2018 9:44 am
Forum: for sale / freebies
Topic: Possible BBC B Econet Upgrade Kit
Replies: 44
Views: 2211

Re: Possible BBC B Econet Upgrade Kit

matt_nottm wrote:One final kit available, any takers...
I'd like to take the remaining kit.
by Bagpuss
Wed Apr 04, 2018 9:15 am
Forum: hardware
Topic: Scope recommendations
Replies: 16
Views: 883

Scope recommendations

Hi All, I've come to the conclusion that I'm never going to fix the faults in my remaining Beebs without a scope. I had a quick chat with Mark@Retroclinic (thanks for your time, Mark. Much appeciated.), but I don't think I can reasonably justify the expense for a Tektronix or Keysight model. My curr...
by Bagpuss
Tue Apr 03, 2018 2:50 pm
Forum: software: new games
Topic: New version of Frogger (was: A demo of what is looking like a new Frogger for the beeb)
Replies: 191
Views: 22062

Re: New version of Frogger (was: A demo of what is looking like a new Frogger for the beeb)

I've now flashed Rob's fixed code, and it all works fine. I've done some more testing today with a variety of MODE 1 games, and everything looks good. Thanks Andy - I really appreciate your help particularly as my test setup is hard to get to at the moment! No worries. Glad I could help. Have done ...
by Bagpuss
Sat Mar 31, 2018 8:59 pm
Forum: hardware
Topic: Master floppy interface not working
Replies: 2
Views: 199

Re: Master floppy interface not working

All the basics have been done. Changed the caps in the PSU. All voltages are good under load. DFS is the default. CMOS battery has been replaced with a new lithium pack from RetroClinic. Everything is identical to my other Master in terms of configuration, and it works just fine. I'm beginning to su...
by Bagpuss
Sat Mar 31, 2018 6:54 pm
Forum: hardware
Topic: Master floppy interface not working
Replies: 2
Views: 199

Master floppy interface not working

I'm on a bit of a roll with getting my old Beebs running at the moment. Just dug my second Master Turbo out of the loft, and everything works apart from the floppy interface. I've cleaned up the pins and confirmed the continuity between the connector and the opposite end of the cable. Plugging in ei...
by Bagpuss
Sat Mar 31, 2018 1:25 pm
Forum: software: new games
Topic: New version of Frogger (was: A demo of what is looking like a new Frogger for the beeb)
Replies: 191
Views: 22062

Re: New version of Frogger (was: A demo of what is looking like a new Frogger for the beeb)

Rob, do you happen to know if the cheap xilinx copy programmer listed for the Matchbox Copro will work? I did wonder about that, as I've got the Xilinx too. I think it should, but I ended up buying this . Works well, unless you're using Windows 10 x64. If you are, then the drivers that come with th...
by Bagpuss
Thu Mar 29, 2018 1:32 pm
Forum: software: new games
Topic: New version of Frogger (was: A demo of what is looking like a new Frogger for the beeb)
Replies: 191
Views: 22062

Re: New version of Frogger (was: A demo of what is looking like a new Frogger for the beeb)

Just in case it helps, this is what the game actually looks like:
nula-broken.jpg
I've just noticed that the colours for the bottom and middle 'kerbs' are green instead of magenta.
by Bagpuss
Thu Mar 29, 2018 11:32 am
Forum: software: new games
Topic: New version of Frogger (was: A demo of what is looking like a new Frogger for the beeb)
Replies: 191
Views: 22062

Re: New version of Frogger (was: A demo of what is looking like a new Frogger for the beeb)

Hi Richard, I've just tried the new SSD on my NuLA equipped Master and the game runs with standard colours only. I've got the 1.02 version of the NuLA rom installed, and other NuLA enabled demos etc. work just fine. There might be one small difference in my setup, as I have just updated the NuLA wit...