Today I received.....

on-topic Acorn-related news and discussions not covered by the other forums
matt_nottm
Posts: 86
Joined: Sat Feb 11, 2017 11:54 am
Contact:

Re: Today I received.....

Postby matt_nottm » Sun May 13, 2018 4:38 pm

gazzaD wrote:It turns out I've managed to leave a ground pad isolated, despite having a ground plane across most of the board base, so not quite ready for sharing yet. I'll fix that at some point next week, and publish the design once I've has a set come back I know is correct. Given the size of the boards, it's only $16 for 3.


I don't know if you are interested in taking orders for some bare PCBs when you next get a batch please, but I would be interested in 2 or 3 if possible? Happy to pay costs and postage.

User avatar
tricky
Posts: 2370
Joined: Tue Jun 21, 2011 8:25 am
Contact:

Re: Today I received.....

Postby tricky » Thu May 17, 2018 6:31 pm

My boards are here from JLCPCB.
30 dual Atari joystick to beeb and 10 dual megadrive to beeb adapters boards, shame I'm away for the weekend at Revival and probably won't get to build any.
boards.jpg
The mega drive ones support 1 button each or 2 buttons on one or with software support (see Warlords) 2 buttons on each or 4 buttons on one, selected with a switch between the ports.

The idea is that they can be built into a 37 way DSUB connector case and have a 15 pin dsub attached to the board (cutting off the excess case) to plug directly into the beeb or with a straight through cable (9 core Atari or 10 core Sega IIRC).
usage.jpg

The accuracy of the manufacturing seems good to my untrained eyes. The holes aren't blocked, despite what it might look like, but even if they were, they seem to have included a complimentary pointy stick!
accuracy.jpg

The total cost was just under a tenner, although that did take a bit of tweaking and using air-mail, which apparently takes 2-4 weeks (mine was 2 from ordering). Air-mail "small print" says that you are liable for postage back to them if it can't be delivered and is sent back to them!

User avatar
danielj
Posts: 5974
Joined: Thu Oct 02, 2008 4:51 pm
Location: Manchester
Contact:

Re: Today I received.....

Postby danielj » Thu May 17, 2018 8:38 pm

Great work Tricky :) - I've been really happy with JLC! The price is outrageously good.

d.

User avatar
1024MAK
Posts: 7289
Joined: Mon Apr 18, 2011 4:46 pm
Location: Looking forward to summer in Somerset, UK...
Contact:

Re: Today I received.....

Postby 1024MAK » Fri May 18, 2018 10:02 pm

Today's and yesterday's arrivals...
IMG_7112.JPG
Beeb SCSI

IMG_7113.JPG
Beeb SCSI

IMG_7110.JPG
NodeMCU LoLin ESP8266 ESP12E WiFi module

IMG_7109.JPG
6V solar panels

IMG_7106.JPG
gigatron kit

IMG_7107.JPG
gigatron IC's

IMG_7108.JPG
gigatron PCB

Mark
For a "Complete BBC Games Archive" visit www.bbcmicro.co.uk NOW!
BeebWiki‬ - for answers to many questions...

User avatar
Elminster
Posts: 1775
Joined: Wed Jun 20, 2012 8:09 am
Location: Essex, UK
Contact:

Re: Today I received.....

Postby Elminster » Fri May 18, 2018 10:31 pm

OOh. You went for the Gigatron. I looked at these but really expensive and limited what you could do with it at the moment. Maybe one for a later date.

User avatar
flynnjs
Posts: 784
Joined: Tue Jul 06, 2010 9:33 pm
Contact:

Re: Today I received.....

Postby flynnjs » Sat May 19, 2018 8:11 am

1024MAK wrote:Today's and yesterday's arrivals...


It was pot-luck who got the red PCB. I had just one of those left.
The green ones are laid out with the connector the other side so
it doesn't need the extension.
There are no more PCBs (red or green) left now.

User avatar
IanS
Posts: 564
Joined: Mon Aug 31, 2009 6:02 pm
Contact:

Re: Today I received.....

Postby IanS » Sat May 19, 2018 6:59 pm

A PCB to allow me to test -8-bit podules in an Archimedes. (I don't want to wear out the connectors in my A3000)
IMG_20180519_163958301.jpg

(my first non-rectangular PCB!)

And some new 8-bit IDE podule PCBs, now with room to fit a DOM on the 44-pin connector, so no cables or adapters required.
IMG_20180519_164037792.jpg

(Now with rounded corners, I'm easily amused)

User avatar
lcww1
Posts: 197
Joined: Wed Mar 15, 2017 11:16 pm
Location: East of the Sun and West of the Moon
Contact:

Re: Today I received.....

Postby lcww1 » Sat May 19, 2018 7:57 pm


User avatar
Elminster
Posts: 1775
Joined: Wed Jun 20, 2012 8:09 am
Location: Essex, UK
Contact:

Re: Today I received.....

Postby Elminster » Sat May 19, 2018 8:08 pm

Ben's 6502'esk boards for the rc2014, actually arrived yesterday but dodnt get time to post.
Attachments
IMG_3812.jpg

steve3000
Posts: 1816
Joined: Sun Nov 25, 2012 12:43 am
Contact:

Re: Today I received.....

Postby steve3000 » Sun May 20, 2018 2:08 pm

Thanks to Retroclinic, yesterday I received this rather unusual beast:
tn_20180520_145225.jpg

So hopefully I can finally fix this.

Andy1979
Posts: 85
Joined: Mon Mar 27, 2017 9:04 pm
Contact:

Re: Today I received.....

Postby Andy1979 » Sun May 20, 2018 3:34 pm

Another satisfied Retroclinic customer - RS232 port upgrade for my Master Compact. Works great with danielj's Wifi modem instructions.

IMG_5209.JPG