Eagle M2 Podule Software

chat about arc/risc pc gaming & RISC OS software here (NOT the core OS!)

Related forum: adventures


User avatar
danielj
Posts: 5136
Joined: Thu Oct 02, 2008 4:51 pm
Location: Manchester

Eagle M2 Podule Software

Postby danielj » Sun Aug 13, 2017 6:51 pm

Hullo, hullo - I have an eagle M2 podule that I've just housed in a computer... Does anyone happen to have a copy of the software for it knocking about?

http://chrisacorns.computinghistory.org ... Eagle.html

Many thanks in advance!

d.

Paul
Posts: 73
Joined: Fri Nov 15, 2013 10:39 am
Contact:

Re: Eagle M2 Podule Software

Postby Paul » Tue Aug 15, 2017 10:44 pm

I think i might.. i'll go for a look on Friday and image the discs if I have them. Or zip. Any preference?

User avatar
danielj
Posts: 5136
Joined: Thu Oct 02, 2008 4:51 pm
Location: Manchester

Re: Eagle M2 Podule Software

Postby danielj » Wed Aug 16, 2017 6:02 am

Ooh, thanks Paul. ZIP is perfect (and mostly easier!)


d.

Paul
Posts: 73
Joined: Fri Nov 15, 2013 10:39 am
Contact:

Re: Eagle M2 Podule Software

Postby Paul » Sat Aug 19, 2017 6:18 am

Hi. Sorry i hadnt put up the zip file yet. It wasnt in my immediate box so ive popped it into storage. Im going there tommorow morning so will have it ready for then :)

Paul.

User avatar
danielj
Posts: 5136
Joined: Thu Oct 02, 2008 4:51 pm
Location: Manchester

Re: Eagle M2 Podule Software

Postby danielj » Sat Aug 19, 2017 6:26 am

Not to worry - I'm not in a great rush or anything! :D Thank you for digging it out :)

d.

Paul
Posts: 73
Joined: Fri Nov 15, 2013 10:39 am
Contact:

Re: Eagle M2 Podule Software

Postby Paul » Mon Aug 21, 2017 6:27 am

Hi Daniel,

We'll I finally found the disk, an original one labelled 'Eagle M2'. Its got two programs, !Install which installs (surprisingly) the Replay codecs, and !TakeTwo which is the video digitizer.

https://www.leightonelectronics.co.uk/riscos/acorn-hardware-drivers/EagleM2.arc

I've not run my Eagle card for a while, but I think it was all very straight forward. Good luck!

Paul.


Return to “software”

Who is online

Users browsing this forum: No registered users and 3 guests