Hi there!

where both new and existing forum members can say 'hi' to each other!
gazzaD
Posts: 20
Joined: Sun Jun 18, 2017 11:37 am

Hi there!

Postby gazzaD » Tue Jun 27, 2017 5:36 pm

Good evening from a damp East London,
I was in Primary School as the BBC computer literacy project came about, and spent most of my schooling using Acorn machines until I reached university. Wind the clock forward a few years and I found myself working at the BBC, and getting the opportunity to meet one or two of the people involved in the computer literacy project who were still about, which was cool and brought on a wave of nostalgia.

Towards the end of last year a friend asked for some help in fitting a disk upgrade to their BBC B, and it reminded me how much fun these machines are, and my history with them. Moving on a few months, I now have a model B with disk, Econet and a matchbox copro, a dual MEMC 8MB A3000 with Econet, and a couple of A3020s. One currently dead pending me having the time to track down a ram control line fault, and the other is working happily as my Level 4 FS, resharing the NFS storage and HP printer across the Econet from my ethernet LAN.

It's been entertaining restoring the machines that were in various states of disrepair when I got them, and most of the info I needed to fix them I found on this site. So I thought it was probably about time to join not only to say thanks, but to join in sharing the knowledge here.

Gareth.
Gareth

User avatar
Multiwizard
Posts: 1217
Joined: Wed Jan 11, 2012 9:03 pm
Contact:

Re: Hi there!

Postby Multiwizard » Tue Jun 27, 2017 5:46 pm

Hi Gareth,

welcome to this great Forum... :D


Greetings from my little Dutch Acorn Attic, Wim... :-)

User avatar
daveejhitchins
Posts: 3692
Joined: Wed Jun 13, 2012 5:23 pm
Location: Newton Aycliffe, County Durham

Re: Hi there!

Postby daveejhitchins » Tue Jun 27, 2017 6:13 pm

Welcome to the Forum, Gareth . . . Enjoy . . .

Well done with the kit you've already restored and good luck with what you have left =D>

Dave H :D
Parts: UM6502CE, GAL22V10D, GAL16V8D, AS6C62256A, TC514400AZ, WD1772, R6522, TMS27C512, AT28C256
Products: ARA II, ABR, ATI, AP6, MGC, AP5 . . .
For a price list, contact me at: Retro Hardware AT dave ej hitchins DOT plus DOT com

User avatar
DutchAcorn
Posts: 1635
Joined: Fri Mar 21, 2014 9:56 am
Location: Maarn, Netherlands

Re: Hi there!

Postby DutchAcorn » Tue Jun 27, 2017 6:14 pm

Thanks for the intro Gareth! Enjoy your retro experience and this forum! :D
Paul

User avatar
Elminster
Posts: 1632
Joined: Wed Jun 20, 2012 8:09 am
Location: Essex, UK

Re: Hi there!

Postby Elminster » Tue Jun 27, 2017 7:25 pm

Welcome. We do seem to have been putting on a spurt the last couple of weeks, so lots of fresh faces.

User avatar
tricky
Posts: 1923
Joined: Tue Jun 21, 2011 8:25 am
Contact:

Re: Hi there!

Postby tricky » Tue Jun 27, 2017 7:29 pm

Welcome, glad to have you aboard.
If you don't mind me asking, were you involved in the electrical side?

User avatar
helpful
Posts: 406
Joined: Tue Sep 22, 2009 12:18 pm
Location: London
Contact:

Re: Hi there!

Postby helpful » Thu Jun 29, 2017 6:55 pm

Welcome!

gazzaD wrote:Good evening from a damp East London,


For a warm dry welcome in person, see sig :-)

Bryan.
RISC OS User Group Of London - http://www.rougol.jellybaby.net/
RISC OS London Show - http://www.riscoslondonshow.co.uk/

User avatar
flaxcottage
Posts: 2800
Joined: Thu Dec 13, 2012 8:46 pm
Location: Derbyshire

Re: Hi there!

Postby flaxcottage » Thu Jun 29, 2017 9:15 pm

Welcome Gareth. :D

Snap - my A3020 runs my Econet using L4FS.
- John

Currently running Level 4 Econet with BBC B, BBC B+ 128K, Master 128K, 4Mb A3000, 4Mb A3020, 4Mb A4000, 4Mb A5000 dual FDD; UK101; HP41CX setup; Psion 3a, 3mx and 5mx; Z88; TI-58c, TI-59 and printer, HP-16C programmer's calculator

User avatar
CMcDougall
Posts: 5623
Joined: Wed Feb 02, 2005 3:13 pm
Location: Shadow in a Valley of Scotland

Re: Hi there!

Postby CMcDougall » Fri Jul 07, 2017 4:04 pm

welcome Gareth :)
ImageImageImage

gazzaD
Posts: 20
Joined: Sun Jun 18, 2017 11:37 am

Re: Hi there!

Postby gazzaD » Sun Jul 09, 2017 10:47 pm

tricky wrote:If you don't mind me asking, were you involved in the electrical side?

Apologies, didn't see this earlier.

When I was working in Bush House for the beeb, my team had about 60 servers to look after, which made us one of the larger consumers of power on the site. So I very much had an interest in the power distribution on the site, including everything from minor works on boards that feed the apparatus rooms, all the way up to changes on the 6KV feeds into the buildings.
Gareth

User avatar
davidb
Posts: 1902
Joined: Sun Nov 11, 2007 10:11 pm
Contact:

Re: Hi there!

Postby davidb » Sun Jul 09, 2017 10:53 pm

Welcome! :D

User avatar
oss003
Posts: 2554
Joined: Tue Jul 14, 2009 11:57 am
Location: Netherlands
Contact:

Re: Hi there!

Postby oss003 » Mon Jul 10, 2017 9:01 am

Hi Gareth,

Welcome and enjoy the forum ........

Greetings
Kees


Return to “introduce yourself”

Who is online

Users browsing this forum: No registered users and 7 guests