Search found 61 matches

by Bagpuss
Mon Apr 16, 2018 10:01 am
Forum: hardware
Topic: Scope recommendations
Replies: 16
Views: 650

Re: Scope recommendations

Been meaning to update on this, but currently got some personal issues going on, so not been around.
Went with the Rigol 1054Z, as Rigol-UK (aka Telonic) offered me a reasonable discount.
by Bagpuss
Mon Apr 16, 2018 9:54 am
Forum: upcoming and recent events & exhibitions
Topic: ABUG SOUTH 1 to 3 June 2018 (Hampshire) BOOKING THREAD
Replies: 31
Views: 2469

Re: ABUG SOUTH 1 to 3 June 2018 (Hampshire) BOOKING THREAD

I'm already on the list, but will definitely be attending for all 3 days. I'd also like a full table.
by Bagpuss
Mon Apr 16, 2018 9:38 am
Forum: hardware
Topic: Master level shifter for PiTube Direct won't fit with VideoNuLA
Replies: 25
Views: 781

Re: Master level shifter for PiTube Direct won't fit with VideoNuLA

Can someone link to bought parts, and what they did to make stuff fit? I bought these , which make it fit perfectly. You need the 12/3mm versions, as there is a choice in a dropdown. I unsoldered the existing pins, and replaced them with the above. If you don't have a desoldering gun, you will prob...
by Bagpuss
Fri Apr 13, 2018 10:44 am
Forum: hardware
Topic: Master level shifter for PiTube Direct won't fit with VideoNuLA
Replies: 25
Views: 781

Re: Master level shifter for PiTube Direct won't fit with VideoNuLA

I managed to get an ADFS hard drive, a VFS hard drive, PiTubeDirect, upgraded PSU and a wireless mouse interface (SmallyMouse2) inside the case; there's also econet and MultiOS in there... and I didn't even need to stick anything to the lid :) I need to get a VideoNuLA soon :) You're just showing o...
by Bagpuss
Thu Apr 12, 2018 6:47 pm
Forum: hardware
Topic: Master level shifter for PiTube Direct won't fit with VideoNuLA
Replies: 25
Views: 781

Re: Master level shifter for PiTube Direct won't fit with VideoNuLA

It's getting a bit tight in my case already.

We've got the VideoNuLA, PiTube Direct, Econet, MultiOS and Internal DC.
Next project is to build a BeebSID to go along with my BeebOPL and see if I can fit both of them in the case. :D
by Bagpuss
Thu Apr 12, 2018 2:56 pm
Forum: hardware
Topic: Master level shifter for PiTube Direct won't fit with VideoNuLA
Replies: 25
Views: 781

Re: Master level shifter for PiTube Direct won't fit with VideoNuLA

Got it all to fit. Found some 12mm pins on eBay and they are perfect:
pitube-nula.jpg

The PiTube just clears the VideoNuLA and leaves plenty of space above for the internal DC.
by Bagpuss
Wed Apr 11, 2018 3:44 pm
Forum: for sale / freebies
Topic: BeebSCSI mini
Replies: 152
Views: 11388

Re: BeebSCSI mini

flynnjs wrote:3rd batch are now fully dispatched.

Mine just arrived. Big thumbs up. :-)
by Bagpuss
Tue Apr 10, 2018 2:55 pm
Forum: hardware
Topic: Master level shifter for PiTube Direct won't fit with VideoNuLA
Replies: 25
Views: 781

Re: Master level shifter for PiTube Direct won't fit with VideoNuLA

...snip... , otherwise it will infringe on the CF card adapter that's attached to the DC. Just a thought, a short IDE extension cable would move the adapter out of the way? Good thought, JonC. I did think about doing that, but it then makes fitting the BeebSID and/or BeebOPL inside the case lid pre...
by Bagpuss
Mon Apr 09, 2018 12:41 pm
Forum: hardware
Topic: Master level shifter for PiTube Direct won't fit with VideoNuLA
Replies: 25
Views: 781

Re: Master level shifter for PiTube Direct won't fit with VideoNuLA

Thanks Rob. Much appreciated. I've done a bit of a of bodge, thus: connector-bodge.jpg but this makes the copro too tall for the case to shut, as I've got an internal DataCentre mounted to the underside of the upper case. internal-dc.jpg The standard 65C02 copro fits perfectly, which means that the ...
by Bagpuss
Mon Apr 09, 2018 9:45 am
Forum: hardware
Topic: Master level shifter for PiTube Direct won't fit with VideoNuLA
Replies: 25
Views: 781

Master level shifter for PiTube Direct won't fit with VideoNuLA

Hi All, I've just received my two Master level shifters for the PiTube Direct, and found a small problem. My Master has a VideoNuLA installed, and the level shifter boards won't fit as the VideoNuLA is too tall. I should have looked more closely at the images of the adapter board. I just assumed tha...
by Bagpuss
Fri Apr 06, 2018 9:16 am
Forum: hardware
Topic: Palettemate / enhanced video ULA with 4096 colours
Replies: 558
Views: 41408

Re: Palettemate / enhanced video ULA with 4096 colours

Is this what I need to program it myself? https://www.ebay.co.uk/itm/Altera-Mini-Usb-Blaster-Cable-For-CPLD-FPGA-NIOS-JTAG-Altera-Programmer-NEW-UK/192169107304?_trkparms=aid%3D222007%26algo%3DSIM.MBE%26ao%3D2%26asc%3D49129%26meid%3Ddf560351ebfd4083aafa74da94eb5907%26pid%3D100005%26rk%3D6%26rkt%3D6...
by Bagpuss
Thu Apr 05, 2018 1:09 pm
Forum: for sale / freebies
Topic: BeebSCSI mini
Replies: 152
Views: 11388

Re: BeebSCSI mini

I might be intersted in one of these, but could I please have some further details including price. Thanks. All the units from the 3rd production run are now spoken for. There is a waiting list for the 4th batch, but no confirmed production date as yet. Cost of the previous units was £37.95 each (i...
by Bagpuss
Thu Apr 05, 2018 10:32 am
Forum: hardware
Topic: Scope recommendations
Replies: 16
Views: 650

Re: Scope recommendations

Thanks for all feedback. Much appreciated. :D
by Bagpuss
Wed Apr 04, 2018 9:44 am
Forum: for sale / freebies
Topic: Possible BBC B Econet Upgrade Kit
Replies: 43
Views: 1659

Re: Possible BBC B Econet Upgrade Kit

matt_nottm wrote:One final kit available, any takers...


I'd like to take the remaining kit.
by Bagpuss
Wed Apr 04, 2018 9:15 am
Forum: hardware
Topic: Scope recommendations
Replies: 16
Views: 650

Scope recommendations

Hi All, I've come to the conclusion that I'm never going to fix the faults in my remaining Beebs without a scope. I had a quick chat with Mark@Retroclinic (thanks for your time, Mark. Much appeciated.), but I don't think I can reasonably justify the expense for a Tektronix or Keysight model. My curr...
by Bagpuss
Tue Apr 03, 2018 2:50 pm
Forum: software: new games
Topic: New version of Frogger (was: A demo of what is looking like a new Frogger for the beeb)
Replies: 178
Views: 18717

Re: New version of Frogger (was: A demo of what is looking like a new Frogger for the beeb)

I've now flashed Rob's fixed code, and it all works fine. I've done some more testing today with a variety of MODE 1 games, and everything looks good. Thanks Andy - I really appreciate your help particularly as my test setup is hard to get to at the moment! No worries. Glad I could help. Have done ...
by Bagpuss
Sat Mar 31, 2018 8:59 pm
Forum: hardware
Topic: Master floppy interface not working
Replies: 2
Views: 154

Re: Master floppy interface not working

All the basics have been done. Changed the caps in the PSU. All voltages are good under load. DFS is the default. CMOS battery has been replaced with a new lithium pack from RetroClinic. Everything is identical to my other Master in terms of configuration, and it works just fine. I'm beginning to su...
by Bagpuss
Sat Mar 31, 2018 6:54 pm
Forum: hardware
Topic: Master floppy interface not working
Replies: 2
Views: 154

Master floppy interface not working

I'm on a bit of a roll with getting my old Beebs running at the moment. Just dug my second Master Turbo out of the loft, and everything works apart from the floppy interface. I've cleaned up the pins and confirmed the continuity between the connector and the opposite end of the cable. Plugging in ei...
by Bagpuss
Sat Mar 31, 2018 1:25 pm
Forum: software: new games
Topic: New version of Frogger (was: A demo of what is looking like a new Frogger for the beeb)
Replies: 178
Views: 18717

Re: New version of Frogger (was: A demo of what is looking like a new Frogger for the beeb)

Rob, do you happen to know if the cheap xilinx copy programmer listed for the Matchbox Copro will work? I did wonder about that, as I've got the Xilinx too. I think it should, but I ended up buying this . Works well, unless you're using Windows 10 x64. If you are, then the drivers that come with th...
by Bagpuss
Thu Mar 29, 2018 1:32 pm
Forum: software: new games
Topic: New version of Frogger (was: A demo of what is looking like a new Frogger for the beeb)
Replies: 178
Views: 18717

Re: New version of Frogger (was: A demo of what is looking like a new Frogger for the beeb)

Just in case it helps, this is what the game actually looks like:
nula-broken.jpg

I've just noticed that the colours for the bottom and middle 'kerbs' are green instead of magenta.
by Bagpuss
Thu Mar 29, 2018 11:32 am
Forum: software: new games
Topic: New version of Frogger (was: A demo of what is looking like a new Frogger for the beeb)
Replies: 178
Views: 18717

Re: New version of Frogger (was: A demo of what is looking like a new Frogger for the beeb)

Hi Richard, I've just tried the new SSD on my NuLA equipped Master and the game runs with standard colours only. I've got the 1.02 version of the NuLA rom installed, and other NuLA enabled demos etc. work just fine. There might be one small difference in my setup, as I have just updated the NuLA wit...
by Bagpuss
Wed Mar 28, 2018 11:24 am
Forum: for sale / freebies
Topic: BeebSCSI full size + internal VFS adaptor boards
Replies: 103
Views: 3450

Re: BeebSCSI full size + internal VFS adaptor boards

Scratch that. Just realised that I'm about 3 weeks behind the times.... :-(
Really must remember to subscribe to these threads.

Hi Daniel,

If the VFS board you just mentioned on Facebook is still available, then I'd like to take it, please.

Thanks,

Andy.
by Bagpuss
Tue Mar 27, 2018 10:07 am
Forum: hardware
Topic: Gotek question around image compatibility
Replies: 11
Views: 446

Gotek question around image compatibility

Hi All, Just finished building my Gotek with OLED screen, rotary control and piezo sounder (Thanks danielj for the excellent video tutorial =D> ). I started off with the flashfloppy firmware, which works fine, but still lacks SSD and DSD support. I'm trying to avoid having to do any image conversion...
by Bagpuss
Mon Mar 26, 2018 9:34 am
Forum: for sale / freebies
Topic: BeebSCSI mini
Replies: 152
Views: 11388

Re: BeebSCSI mini

flynnjs wrote:Sorry, had a bout of illness recently and it's put me behind a bit. I'm hoping to have these finished this week.


No worries at all. Hope you're feeling better now. I'm just grateful that folks like yourself and Simon put so much effort into bringing these projects to life in the first place. :-D
by Bagpuss
Sun Mar 25, 2018 1:36 pm
Forum: hardware
Topic: Questions about BBC B memory fault
Replies: 18
Views: 511

Re: Questions about BBC B memory fault

Just when you think you've got things working... My issue 4 that I thought was working fine has now developed an interesting fault. I've run pretty much every test I can think of on the machine, and I'm still seeing the occasional speckle on a mode 0 screen. It often happens when you type. In fact, ...
by Bagpuss
Sun Mar 25, 2018 12:44 pm
Forum: hardware
Topic: Questions about BBC B memory fault
Replies: 18
Views: 511

Re: Questions about BBC B memory fault

Killer Gorilla works just fine on both machines.
by Bagpuss
Sun Mar 25, 2018 12:42 pm
Forum: for sale / freebies
Topic: New TEAC floppy drives
Replies: 55
Views: 4051

Re: New TEAC floppy drives

I'd definitely be interested in 2x drives if you do another order.
by Bagpuss
Sun Mar 25, 2018 12:35 pm
Forum: hardware
Topic: Questions about BBC B memory fault
Replies: 18
Views: 511

Re: Questions about BBC B memory fault

Just had one final question. I've been running some tests on the newly fixed machine, and all appears to work just fine, apart from the original Acornsoft Defender. All of the alien graphics plot on top of each other. I'm using the version that comes with big games menu. I know that this version can...
by Bagpuss
Fri Mar 23, 2018 11:41 pm
Forum: hardware
Topic: Questions about BBC B memory fault
Replies: 18
Views: 511

Re: Questions about BBC B memory fault

I think we suffer from the same OCD traits. ;-) I didn't notice they were missing until I posted the photo. Rest assured, it's corrected now... memory-error-2.jpg Much better! :D Making an SSD also sounds like a great idea. Like you say, it's getting a bit long to type in. I managed to miss those br...
by Bagpuss
Fri Mar 23, 2018 11:26 pm
Forum: hardware
Topic: Questions about BBC B memory fault
Replies: 18
Views: 511

Re: Questions about BBC B memory fault

Managed to attach the chip to an IC socket, and lo and behold...

memory-error.jpg